Hints & Tips
Cleaning Tips

Learn More Cleaning your Vacuum Food Sealer
Learn More Cleaning the Sealing Foam
Learn More Cleaning the Removable Lock 'n Seal™ Nozzle/Drip Tray (VS105, VS120, VS125 series)
Learn More Cleaning the Removable Drip Tray (VS75, VS100, VS110 series)
Learn More Cleaning the Bags


Cleaning your Vacuum Food Sealer
  • Always unplug the unit before cleaning.
  • Always remove from wall-mounted position prior to cleaning.
  • Do not immerse in water.
  • Do not use abrasives to clean the unit.
For White, Black or other non-Chrome finishes:
  • Wipe the outside of the unit with a damp cloth and soap.
For Chrome finish:
  • Lightly spray a soft, clean cloth with a no wax formula furniture polish.
  • Lightly rub the outside surfaces (such as the lid) to remove fingerprints and restore the finish.
    NOTE: Do not use no wax formula furniture polish on the inside of unit or on plastic parts.
back to top

Cleaning the Sealing Foam
Use a warm damp cloth with mild dish soap to remove any liquid or food particles that are on the surface of the foam.

back to top

Cleaning the Removable Lock 'n Seal™ Nozzle/Drip Tray (VS105, VS120, VS125 series)
The Seal-a-Meal® Vacuum Food Sealer is equipped with a Removable Lock 'n Seal™ Nozzle/Drip Tray to trap any liquid that may be drawn from the bag. The Lock 'n Seal Nozzle/Drip Tray contains Microban® antimicrobial product protection, which inhibits the growth of stain and odor causing bacteria and keeps the unit cleaner between cleanings. Normal cleaning practices should be maintained. Does not protect user from food born illnesses.
  1. Pull Lever forward to release the Lock n' Seal Nozzle/Drip Tray.
  2. Carefully remove so as not to spill any contents.
  3. Over sink, open rubber Drain Plug located under the tray at the far end (Do NOT remove the recessed plug) and flush, or soak in warm soapy water (with a mild dish detergent).
  4. Rinse thoroughly and allow to dry.
  5. Replace Lock 'n Seal Nozzle/Drip Tray.

back to top

Cleaning the Removable Drip Tray (VS75, VS100, VS110 series)
The Seal-a-Meal Vacuum Food Sealer is equipped with a Removable Drip Tray to trap any liquid that may be drawn from the bag. The Drip Tray contains Microban antimicrobial product protection, which inhibits the growth of stain and odor causing bacteria and keeps the unit cleaner between cleanings. Normal cleaning practices should be maintained. Does not protect user from food borne illnesses.
  1. Before removing the Drip Tray, absorb any large volume of liquid with paper towel or cloth.
  2. Lift tab on the right end of the removable Drip Tray to release it from the drip tray compartment.
  3. Carefully remove Drip Tray so as not to spill any contents.
  4. Wash or soak in warm soapy water (with mild dish detergent).
  5. Rinse thoroughly and allow to dry.
  6. With the Drip Tray tab to the right, align the center of the Drip Tray with the vacuum port located in the center of the drip tray compartment.
  7. Press the center of the Drip Tray until it locks securely into the compartment.
NOTE: The Removable Drip Tray can be placed in the top rack of the dishwasher for thorough cleaning.

back to top

Cleaning the Bags
  • Wash bags in warm, soapy water.
  • Bags can be washed in the dishwasher if desired. Turn bags inside out and spread them over the top rack.
  • Allow bags to dry completely before using.
NOTE: DO NOT reuse bags if they have been used to store raw meats, fish, oily foods, or have been boiled or microwaved.

back to top